Filter
Top Products
24
If the Dishwashing Results are not Satisfactory
The dishes are still dirty.
• The wrong dishwashing cycle was selected.
• The dishes were loaded is such a way that the dishwashing water did
not reach all items. The baskets for the dishes must not be overload-
ed.
• The filters in the base of the washing compartment are dirty or incor-
rectly positioned.
• Good quality detergent was not used, or too little was used.
• In the case of scale deposits on the dishes: The dishwasher salt dis-
penser is empty or the water softening system has been incorrectly
set.
• The drain hose is incorrectly positioned.
the indicator for the end of
the dishwashing cycle is
flashing in sequence 3 short
light signals one after anoth-
er.
The anti-flood system has
been triggered.
Turn off the tap and
contact the Service
Force Centre.
The cycle is not starting.
The mains plug is not
plugged in.
Plug in mains plug.
A fuse in the house’s wiring
system is defective.
Replace fuse.
For dishwasher models with
a delay start timer:
A start time has been select-
ed.
If the dishes are to be
washed immediately,
cancel the delay start.
Rust spots are visible in the
dishwashing compartment.
The dishwashing compart-
ment is made from rust-free
stainless steel. Rust spots in
the dishwashing compart-
ment are due to rust parti-
cles from external sources
(rust particles from water
pipes, pans, cutlery, etc.).
Remove such spots with a
commercially-available
stainless steel cleaning
product.
Only wash cutlery, dish-
es and pans that are
suitable for dishwasher
use.
A whistling noise can be
heard when washing dishes.
The whistling is not a cause
for concern.
Use a different brand of
detergent.
Malfunction Possible cause Remedy