Filter
Top Products
26
Using 3in1 detergents
These products are detergents with a combined cleaning, rinsing and
salt function.
When the 3in1 function is activated,
– the addition of special salt and rinse aid from the respective dispenser
is prevented.
– If the salt and rinse aid dispensers are empty, this is not indicated.
– The dishwashing cycles can be up to 30 minutes longer.
3 If you want to use 3in1 detergents, check whether these detergents are
suitable for your water hardness. (Follow manufacturer’s instructions!)
If your water hardness is higher than that recommended by the manu-
facturer but you would nevertheless like to use 3in1 detergent, proceed
as follows:
• With the 3in1 function selected, set the water softener one hardness
setting lower than when rinsing without 3in1 detergent.
• Fill up the dispenser (if this is empty) with special salt.
The dishwasher remembers the two different settings of the degree of
hardness for rinsing with and without 3in1 function.
If you want to use 3in1 products
1.Press the ON/OFF button.
2.Go to the 3 IN 1 option.
3.Set the value to ON (see section “Adjusting an option/setting” sym-
bol lights up in the symbol line.
Before the start of the dishwashing cycle put 3in1 detergent in the de-
tergent dispenser.
3 As the rinse aid inflow is automatically switched off when the 3in1
function is activated, it may come about because of the different qual-
ity standards in the 3in1 detergent, that the dishes do not dry suffi-
ciently.
If this happens, proceed as follows (see section “Adding rinse aid”):
• Fill up the dispenser (if this is empty) with rinse aid.
• Set rinse aid dosage to “2” mechanically.
• Activate rinse aid inflow.