Filter
Top Products
12
Charcoal filter
The charcoal filter is already supplied and mounted in place.
The charcoal filter should only be used if you want to use the hood
in its filtering function.
Only applicable for recirculation. The charcoal filters absorb smells
and odours.
The charcoal filter cannot be washed nor regenerated.
The charcoal filter should be replaced every 6 months under normal
use.
Replacement filters are available from your local Service Force
Centre.
Fitting the charcoal filter:
Unplug the unit or disconnect it from the power supply
Remove the metal grease filter. Fig. 4
Fit the charcoal filter and fix it to the body of the hood with two
supplied screws. Fig. 5.
Refit the metal grease filters.
To remove proceed in reverse order.
Always specify the hood model code number and serial number
when ordering replacement filters. This information is shown on the
registration plate located on the inside of the unit.
The charcoal filter can be ordered from your local Service Force
Centre.
Fig. 5
K