Filter
Top Products
17
1
2
3
4
12
14
13
13
10a
10b
11
Fig. 12
Extractor version
Filter version
Fig. 13
HD 8795 only: Fix the
sides of the cooker
hood by fastening the
pins (10a) to the sides
of the fastening screws
(10b).
Block the sides sliding
the two tabs outwards
(11).
Make electrical
connection (12), but
leave the hood
disconnected from the
home general electric
panel.
In the case that it is
decided to use the cooker hood in the extraction version, then fix
one of the two flanges provided in the exit hole (13 extraction).
Attention! The tall flange should be used when a telescopic
chimney is required to be mounted (this item should be ordered
see special accessories), the short flange is to be used in all other
cases.
Remount the grease filter and the front panels noting the numbering
on the back of each screen (from 1 to 4, top to bottom).
Connect the hood to the mains supply and check the functions are
working correctly.