Filter
Top Products
Cancelling a delay start or
a washing programme in
progress
• Simultaneously press and hold the two
programme buttons positioned over the
word Cancel, until all the programme
button lights come on.
• Cancelling a delay start involves also the
cancelling of the washing programme set. In
this case you have to set the washing
programme again.
• If a new washing programme is to be
selected, check that there is detergent in
the detergent dispenser.
Warning! Interrupt or cancel a
washing programme in progress
ONLY if it’s absolutely
necessary. Attention! Hot steam
may escape when the door is
opened. Open the door carefully.
Interrupt a washing
programme in progress
• Open the dishwasher door; the
programme will stop. Close the door; the
programme will start from the point at
which it was interrupted.
End of the washing
programme
• The dishwasher will automatically stop and
an audible signal informs you of the end of
the washing programme.
1. Open the dishwasher door.
The indicator light of the programme just
ended remains illuminated.
2. Switch off the dishwasher by pressing the
On/Off button.
3. Leave the dishwasher door ajar and wait
a few minutes before removing the dishes;
in this way they will be cooler and the
drying will be improved.
When the washing programme
has finished, it is recommended
that the dishwasher is unplugged
and the water tap turned off.
Unloading the dishwasher
• Hot dishes are sensitive to knocks. The
dishes should therefore be allowed to cool
down before removing from the appliance.
• Empty the lower basket first and then the
upper one; this will avoid water dripping
from the upper basket onto the dishes in
the lower one.
• Water may appear on the sides and the
door of the dishwasher as the stainless steel
will eventually become cooler than the
dishes.
21