Filter
Top Products
COOLMATIC
COOLMATIC Button
The COOLMATIC function is suited for quick cooling of
large quantities of goods in the refrigerator, e.g. drinks
and salads for a party.
☞
1. The COOLMATIC function is switched on by pressing the COOLMATIC
button. The yellow light illuminates.
2. The COOLMATIC function now provides for intensive cooling. A
DESIRED temperature of +2°C is automatically selected. The COOL-
MATIC function is ended automatically after a period of 6 hours. The
originally selected DESIRED temperature is again valid. The tempera-
ture display shows the ACTUAL refrigerator temperature.
3. The COOLMATIC function can be ended manually at any time by press-
ing the COOLMATIC button again. The yellow light goes out.
If the COOLMATIC function is switched on the temperature setting
may not be changed.
Malfunctions
If the electronics in the appliance have detected a fault that prevents
the ACTUAL temperature being measured, the temperature display will
flash. The appliance will continue to function using a backup program
until your local Service Force engineer has repaired the appliance.
Switching off the appliance
☞
To switch off, press the ON/OFF button for approx. 5 seconds. This will
result in a countdown from "3" to "1" taking place in the temperature
display. On reaching "1" the fridge will switch off. The temperature dis-
play will go off.
If the appliance is not going to be used for an extended period:
☞
1. Remove all refrigerated packages.
2. Switch off the appliance by holding down the ON/OFF button until the
display goes off (see above).
3. Remove the mains plug or switch off or disconnect the electricity sup-
ply.
12