Filter
Top Products
Operating Instructions
26
What to do, if ...
Try to rectify minor faults on the dishwasher with the aid of the
instructions given here. If you call an engineer to resolve a of fault
listed here, or to repair a fault caused by incorrect use or installation, a
charge will be made even if the appliance is in guarantee.
...Error messages
• If the L or I indicator on the programme progress display is
flashing, you can probably rectify the fault yourself.
After rectifying an
L or I fault, press the button for the wash
programme that has been started. The wash programme should con-
tinue. If the fault is displayed again, contact AEG Service Force.
• If indicators for other programme steps on the programme progress
display are flashing, please contact AEG Service Force and state the
fault indicated.
Symptom Possible Cause Solution
L on the programme
progress display is
flashing:
no water is running
into the dishwasher.
Tap is closed. Open tap.
The filter (where present) in
the threaded hose fitting is
blocked.
Clean the filter in the
threaded hose fitting.
The water inlet hose is not
correctly laid.
Check hose installation.
I on the programme
progress display is
flashing.
The sink outlet is blocked. Clean the sink outlet.
The water drain hose is not
correctly laid.
Check hose installation.
L and I on the
programme progress
display are flashing
simultaneously.
The leak prevention system
has been triggered.
Close the tap and contact
AEG Service Force.