Filter
Top Products
Changing Over The Door Hinges
14 818 14 33-01/5
0 With the door closed, remove the
cross-head screws from the lower
door bearing and remove the door
bearing downwards.
0 Remove the door fitting from the
door bearing (1, 2). Move the bea-
ring pivot from the right to the
left hand hole (3). Place the door
fitting supplied on the bearing
pivot (4, 5).
0 Remove the door fitting on the
lower right (1) and reposition the
door bearing cover from the lower
left to the right of the door (2),
place the door fitting supplied in
the lower left of the door (3).
Carefully remove the door to the
front and place on one side.
1
2
5
4
3
3
1
2