Filter
Top Products
33
Connecting the water supply
● This dishwasher must be plumbed into a cold water supply.
● Never connect your dishwasher to open hot water appliances and
continuous flow heaters!
Avoid bends or kinks in the hose which could prevent or slow down the
water supply.
If the machine is connected to new pipes or pipes which have not been used
for a long time, you should run the water for a few minutes before
connecting the inlet hose. This will prevent deposits of sand or rust clogging
the inlet hose.
The dishwasher features fill and drain hoses which can be turned either to
the left or the right to suit the installation.
The locknut must be correctly fitted to avoid water leaks.
The water pressure must be within the limits given in the technical
specifications. Your local Water Authority will advise you on the average
mains pressure in your area.
Your dishwasher has been built in accordance with the valid regulations
governing water-consuming appliances and is equipped with safety devices
which prevent used water from flowing back into the drinking water mains.
152985 86/1 en 22-10-1999 13:04 Pagina 33