Filter
Top Products
Temperature setting buttons
The temperature is adjusted using the temperature setting buttons. These buttons are
connected to the temperature indicator.
• The temperature indicator is switched over from the indicator of the ACTUAL temper-
ature (Temperature indicator is illuminated) to the indicator of the DESIRED tempera-
ture (Temperature indicator flashes) by pressing one of the Temperature setting but-
tons.
• Each time one of the two buttons is pressed again the DESIRED temperature is adjus-
ted by 1°C. The DESIRED temperature must be reached within 24 hours.
If neither button is pressed, the temperature indicator automatically switches back after
a short period (approx. 5 sec.) to the indicator of the ACTUAL temperature.
DESIRED temperature means:
The temperature that has been selected for inside the corresponding compartment. The
DESIRED temperature is indicated by flashing numbers.
ACTUAL temperature means:
The temperature indicator shows the current temperature inside the corresponding com-
partment. The ACTUAL temperature is indicated with illuminated numbers.
Temperature indicators
The temperature indicators show several information:
• During normal operation, the temperature currently set for fridge and freezer are dis-
played.
• When the temperature is being adjusted a flashing display indicates the fridge tem-
perature currently set .
Temperature regulation
To operate the appliance, proceed as follows:
1. Set the required temperature by pressing the corresponding temperature regulator.
The temperature indicator will immediately show the changed setting and the tem-
perature indicator flashes.
2. Each time the temperature regulator is pressed the temperature is adjusted by 1 °C.
The set temperature will be reached within 24 hours.
3. The temperature indicator will change from flashing to continuous illumination.
For a correct storage of the food the following temperatures should be set:
• +5 °C in the fridge
• -18 °C in the freezer.
When the setting is changed, the compressor does not start immediately if automatic
defrosting is currently taking place. As the storage temperature within the fridge is
reached quickly you can store food immediately after switching on.
COOLMATIC function
The COOLMATIC function is suited for quick cooling of large quantities of goods in the
refrigerator.
To activate the function, do these steps:
1. Press the COOLMATIC button.
2. The COOLMATIC indicator switches on.
Control panel
7