Electrolux 1050-4 GS Freezer User Manual


 
11
Operating and indicator panel
1 2 3 4 5
1 Temperature control knob and ON/OFF switch
2 Fast freeze button
3 Fast freeze light (amber)
4 Warning light (red)
5 Pilot light (green)
The
temperature control knob (1), which incorporates the appliance’s
On-/Off switch.
The
green pilot light (5), which comes on when the appliance is
switched on and the mains voltage is available. In this switch position,
the refrigerating unit automatically operates by system control.
The
temperature regulator (1), which can be used for continuously
variable setting of the most energy saving storage temperature for
your frozen food.
The optimum storage conditons occur at -18°C.
The
fast-freeze switch (2) with its amber pilot light (3). The amber
pilot light comes on when the switch
(2) has been operated. The
refrigerating unit then operates continuously.
The
red remperature pilot light (4) comes on when:
– the appliance has been started up but the storage temperature has
not yet been attained;
– the minimum storage temperature is no longer being maintained
(fault);
– excessive amounts of fresh food are placed inside; or
– if the appliance door is open for too long.
Important note: if you operate the fast-freeze switch or adjust the
temperature control knob, your appliance’s refrigeration motor may
not start immediately, but does after some time. This does not mean
that your appliance has a fault.
After adjusting the temperature, leave the appliance to set tempera-
ture and allow 24 hours for the temperature to stablise before making
further changes.