Electrolux PL36WC50EC Ventilation Hood User Manual


 
- 10 -
INSTALL FILTERS
(DUCTED AND NON-DUCTED HOODS)
1. To remove the GREASE filter, push in on the metal latch tab and tilt filter
downward to remove.
2. To install the GREASE filter, align rear filter tabs with slots in the hood. Depress
the metal latch tab, push filter into position and release. Make sure filter is
securely engaged after installation.
NOTE: Prior to use, remove protective film from the filter frame.
(NON-DUCTED HOODS ONLY)
1. To remove the NON-DUCTED RECIRCULATION filter, push-in on the front filter
latch. Pull the filter down to disengage the rear filter tabs. Fig. 17.
2. To install the NON-DUCTED RECIRCULATION filter, align the rear filter tabs
with slots in the hood. Push the filter up into place until the front latch snaps
securely into its slot. Make sure the filter is securely engaged after assembly.
3. Install GREASE filters after Non-ducted Recirculation filter is installed.
NON-DUCTED
RECIRCULATION
FILTER
FIG.16
FIG.17
GREASE FILTERS