Filter
Top Products
2
. The evaporator is frosted up.
3
. The temperature control setting is incorrect.
4
. The gas pressure is incorrect - check the pressure regu-
lator at the gas container.
5
. The ambient temperature is too high.
6
. To much food is loaded at one time.
7
. The door is not properly closed or the magnetic sealing
strip is defective.
8
. More than one source of energy is used at the same
time. If the refrigerator still does not work properly, call a
service technician.
M
AINTENANCE
C
oncerning gas- and electric installations, only authorized
e
xperts are allowed to carry out maintenance and repair
w
orks. Besides, it is recommendable to contact an authori-
z
ed service if it comes to repair works.
A
ccording to the valid regulations G607 of DVGW, the gas
i
nstallation as well as the connect flue oulets are to be
c
hecked every two years by an expert (this has to be
a
rranged by the person responsible).
S
OME USEFUL HINTS
M
ake sure that:
● The refrigerator is not operating on 12 V when the ve-
hicle is parked, otherwise you will drain the car bat-tery in
a short time.
● Defrosting is carried out periodically.
● The refrigerator is left with the door(s) ajar when it is not
to be used for some time.
● Liquids or items with a strong odour are well packa-ged.
● The ventilation openings are unobstructed.
● The door is secured by means of the travel catch when
the caravan is on the move.
● Only one mode of operation at a time is used to run the
refrigerator.
G
UARANTEE AND SERVICE
T
he refrigerator is guaranteed for one full year on condition
t
hat it is used in a correct manner and in accordance with
t
hese operating and installation instructions.
I
t is also embraced by a European guarantee as described
i
n the brochure supplied with the refrigerator.
S
ervice and spare sparts are obtainable from your dealer or
E
lectrolux - consult the telephone directory
T
ECHNICAL DATA RM 4280/ 81
Overall dimensions, refrigerator
Height ........................821 mm
Width ........................486 mm
Depth (incl. cooling unit)
without door.............435 mm
with door................474 mm
B
uild-in dimensions
Height ........................825 mm
Width ........................490 mm
Depth ........................460 mm
C
apacity
gross ......................... 81 lit.
net ......................... 77 lit.
frozen food compt .................5 lit.
W
eight (without packaging) ............. 23 kg
E
lectrical data
Input 230 V ..................... 125watt
12V..................... 120watt
Energy consumption /24 h.........2,5kWh
L
P gas data
Input ........................ 232watt
ditto, low flame .................. 116watt
Energy consumption /24 h........0,27 kg
C
ooling medium Ammonia (R 717)
I
NSTALLATION INSTRUCTIONS
R
EPOSITIONING THE HINGES
T
he door hinges can be moved to the opposite side in the
f
ollowing way:
● Unscrew the upper hinge pin, taking care not to lose the
set of washers and bushes.
● Lift the door from the lower hinge pin.
● Unscrew the pin and mount it on the opposite side hinge.
● Unscrew the travel catch and mount it on the opposite
side.
● On the upper edge of the door are two plastic inserts for
the alternative holes of the travel catch. Pry out carefully
and exchange
● Fit the door on the pin and reassemble the pin with
washers and bushes in its new place.
● Check that the door closes properly and seals all round.
D
OOR PANEL
T
he door panel can easily be mounted or changed. The
d
imensions of the panel must be:
Height .................................740 mm
Width .............................. 453,5 mm
Thickness ....................max 3,8 mm
● Remove the door, see REPOSITIONING THE HINGES.
● Remove the lower trim moulding and then withdraw the
panel by sliding it downwards.
● Fit new panel in place and slide it up as far as possible.
● Fit the trim moulding back in place.
The sealed cooling system must not be opened, since
it is under high pressure.
10