Filter
Top Products
Symptom
Interior lighting does not
work.
Heavy build up of frost,
possibly also on the door
seal.
Unusual noises.
The compressor does not
start immediately after
changing the temperature
setting.
Water in the bottom of
the cabinet.
Possible Cause
Light bulb is defective.
Door seal is not airtight
(possibly after reversing
the door).
Appliance is not level.
The appliance is touching
the wall or other objects.
This is normal, no error
has occurred.
Water drain hole is
blocked.
Remedy
Please look in the
“Changing the Light Bulb”
section.
Carefully warm the
leaking sections of the
door seal with a hair dryer
(on a cool setting). At the
sametime shape the
warmed door seal by hand
such that it sits correctly.
Readjust the feet.
Move the appliances
lightly.
The compressor starts
after a period of time.
See the “Cleaning and
Care” section.
19
What to do if ...
Breakdown
The warning signals of the control and signalling system of the appliance
are displayed on the visual display. The system will give out a signal if:
An error has occurred in the operation of the appliance. In case the
electronic system of the appliance cannot identify the real temperature,
one of the following signs will appear on the temperature display:
Until the product is repaired the appliance will continue to run on a
standby program to protect the food stored within.
or