Electrolux S 75408 KG Freezer User Manual


 
11
handle bracket from the door (3) and screw
onto the bottom righthand side of the door
(4). (fig.5)
15. Turn the handle bracket with the handle rod
180° and screw them to the door (5) and the
fitted handle bracket (6). (fig.5) Do not over-
tighten the screw (max. 2 Nm) as you may
damage the door handles.
16. Replace the (u, v) door devices on the oppo-
site side of the other door after turning
them, then fix them by screwing the (s) screw.
17. Replace the (t, z) plugs on the opposite side.
18. Fit the pin of the double door hinge (m) into
the left drill of the freezer door. (fig. 2)
19. Fit the freezer door to the lower door hinge
pin (f). (fig. 4)
20. Fit the refrigerator door to the upper door
hinge pin (d) then slightly tilting both doors
fit the pin of the double door hinge (m) into
the left drill of the refrigerator door.
21. Opening both doors fix the double door
hinge onto the left side using the screws (2
pieces) (c). Do not forget to replace the plas-
tic spacer (b) under the hinge. Be careful that
the door edges are parallel with the edge of
the mantle.
22. Put the appliance to its place, set it level, and
apply to voltage it.
In case you do not want to perform the pro-
cedures above, call the nearest brand-mark
service. Technicians will accomplish the refit-
ting expertly for charge.