Electrolux SANTO 3350-7 KA Refrigerator User Manual


 
818 19 99-00/7 17
Temperature Display
The temperature display can indicate several pieces of information.
• During normal operation, the temperature currently present in the
refrigerator (ACTUAL temperature) is displayed, the corresponding
light illuminates.
• If the temperature in the refrigerator is warmer than the display
range of the temperature display, all the lights in the temperature
display are extinguished.
If the temperature in the refrigerator is colder than the display range
of the temperature display, then the light for the lowest temperature
(+2) continues to illuminate.
• When the temperature is being adjusted, the temperature currently
set flashes (DESIRED temperature).
• If there is a malfunction in the appliance that prevents the
temperature from being further measured, all the lights on the
temperature display flash.
Prior to Initial Start–Up
1
Before connecting the appliance to the mains and putting it into
operation for the first time, leave the appliance to stand for 30 minutes
if was transported upright. After transport on its side, the appliance
must be left to stand for 4 hours before putting it into operation. This is
necessary to allow the refrigerant to flow back into the compressor.
Otherwise the compressor may be damaged.
0 1. Please clean the appliance interior and all accessories prior to initial
start-up (see section: “Maintenance and Cleaning”).
Initial Start-Up
0 1. Insert plug into mains socket.
2. Press ON/OFF button.
The green power indicator lights up.
3. Set the refrigerator to the desired temperature (see section: "Tempera-
ture Adjustment").
3
Goods to be refrigerated can be loaded immediately after switching on,
because the storage temperature in the refrigerator is quickly reached.