Filter
Top Products
9
Interior Accessories
Storage shelves
• You should always slide one of the full size glass storage shelf into the
lowest set of guides, above the fruit and the vegetable containers, and
keep it in this position.
• The height of the storage shelves
can be adjusted:
• To do this pull the storage shelf
forward until it can be swivelle-
dupwards or downwards and
removed.
• Please do the same in reverse to
insert the shelf at a different hei-
ght.
Adjusting the upper door rack
• Depending on the food stored, the upper door racks can be changed to
other holders or removed. Take out the refrigerators food, press the door
racks digonally upwards at their edges, reposition them, and press them
back into place.
D338
1. To turn on the holiday function, press button (C).
2. Press button (C) continuosly until the letter “H” (Holiday) appears on the
temperature indicator. The temperature indicator can modify the displayed
temperature up to +8°C, 1° at a tim. 8°C will be followed by the letter “H”.
Now the refrigerator is in the “holiday” function in the energy-saving mode.
The fridge compartment must be empty with holiday function on.
Humidity control
The glass shelf incorporates a device
with slits (adjustable by means of a sli-
ding lever), which makes it possible to
regulate the temperature in the vege-
table drawer(s).
Close the slots to obtain a warmer
temperature and greater humidity.
Open the slots to obtain a cooler tem-
perature and less humidity.
PR271
20
Unusual noises.
The appliance is touching the
wall or other objects.
Appliance is not level.
The compressor starts after a
period of time.
See the "Cleaning and Care"
section.
This is normal, no error has
occurred.
The compressor does not start
immediately after changing
the temperature setting.
Water on the floor or on sto-
rage shelves.
Water drain hole is blocked.
Move the appliance slightly.
Readjust the feet.
Changing the light bulb
Warning! There is a risk of electric shocks! Before changing the light bulb,
switch off the appliance and unplug it, or pull the fuse or the circuit breaker.
Light bulb data: 220-240 V
1. To switch off the appliance, turn the
temperature regulator to position "0".
2. Unplug the mains plug.
3. To change the light bulb press on the
rear hook and at the same time slide
the cover in the direction indicated
by the arrow.
4. Change the defective light bulb with
one of the some power (the maxi-
mum power is shown on the light
diffuser).
5. Replace the light cover by sliding it into
its original position.
6. Put the refrigerator back into opera-
tion.
Malfunction Possible Cause Remedy