Filter
Top Products
17
What to do if ...
Correcting Malfunctions
Perhaps a malfunction has been caused by a minor error, which you can
correct yourself with the help of the following instructions. Do not
attempt any further repairs if the following instructions do not help in
each specific case.
Warning! Refrigerator/freezers may only be repaired by trained
personnel. Repairs carried out by untrained personnel can lead to
substantial danger for the user. Please contact your Service Force
Engineer for repairs.
Appliance does not
function, green stand-by
display is not lit.
The refrigerator and/or
freezer compartment tem-
perature is insufficient.
Interior illumination does
not function.
Appliance is not switched
on.
Mains plug is not inserted
or is loose.
Fuse has blown or is defec-
tive.
Mains socket is defective.
Temperature is not properly
adjusted.
Door was open for a long
time.
Within the last 24 hours a
large quantity of warm
foods were loaded.
Appliance is next to a
source of warmth.
Light bulb is defective.
Switch appliance on.
Insert mains plug.
Check fuse, replace if
necessary.
Mains malfunctions are to
be corrected by an electri-
cian.
Please refer to the section
"Temperature Adjustment".
Only leave the door open
as long as necessary.
Turn to colder setting.
Please refer to the section
"Installation Location".
Please refer to "Replace
Light Bulb" in this section.
Malfunction Possible cause Remedy