Electrolux SANTO 72348 KA Refrigerator User Manual


 
818 35 74-00/6 19
Initial Start-Up
0 1. Insert plug into mains socket.
2. Press ON/OFF button.
A warning tone sounds and the red warning light flashes indicating
that the required storage temperature has not yet been reached. The
compressor starts and then runs automatically.
3. Press the ALARM OFF button to switch off the warning tone.
4. Set temperature to +5 °C or colder (see section: "Temperature Adjust-
ment").
3
Goods to be refrigerated can be loaded immediately after switching on,
because the storage temperature in the refrigerator is quickly reached.
Temperature Adjustment
With the buttons for temperature adjustment the desired temperatures
in the refrigerator can be adjusted.
0 1. Press either the „+“ (WARMER) or „-“ (COLDER) button.
The temperature display switches over and the DESIRED temperature
currently set flashes on the temperature display.
2. To adjust to a warmer temperature, press the „+“ (WARMER) button. To
adjust to a colder temperature, press the „-“ (COLDER) button. The
changed setting is immediately displayed on the temperature display.
Each time the button is pressed the temperature is adjusted by 1 °C.
Adjustable temperature range: +2 °C to +8 °C, +15 °C (Holiday mode)
Note: From a food safety point of view, +5 °C for the refrigerator
compartment should be considered cold enough as a storage
temperature.
3
When the buttons are not pressed again after an adjustment has been
made, after a short period (approx. 5 sec.) the temperature display swit-
ches over and again displays the ACTUAL temperature in the refrigera-
tor. The display changes from flashing to static numbers.
The compressor will start and then run automatically.
Information! When the setting is changed, the compressor does not
start immediately if automatic defrosting is currently taking place.