Filter
Top Products
11
Push the appliance into
place. The plug socket nec-
essary for connection of
the appliance to the elec-
tricity supply should be
positioned, so that the plug
is not placed in the recess.
To adjust the height pro-
ceed as follows:
Loosen or tighten the two
front feet.
☞
☞
596
555
max
Li89
+
-
2
The rear feet are adjusted by turning the screw in the front kick plate
to the left or right.
☞
If necessary, pads are supplied for
the rear feet to make sliding the
appliance in and out of the recess
easier. To fit the pads, press them
onto the rear feet.
If required, the dimensions of these
pads can be reduced by breaking
them where marked.
☞
N.B. The joint cover (B) is to be
assembled after having
installed the appliance in the
recess.
3
1
2
B
II52
2/a