Filter
Top Products
72
18
ACTIONFREEZE
--
Once set, the temperature display
shows the current temperature inside
the freezer.
Allow the cabinet to run for a period of
24 hours whenever the temperature
setting is changed. This will allow the
temperature to stabilise inside the
cabinet.
It is not necessary to reset the
temperature when the cabinet is
switched on after it has been out of
use. The thermostat recalls the
previously set temperature.
Adjustning the thermometer
display
On delivery, the cabinet's thermometer
is set to show the average temperature
during normal operation conditions. If
the cabinet is used during other
operational conditions, for example, in
warmer surroundings, with a lot of
food or if the cabinet is run entirely or
partially without accessories the
thermometer display can be adjusted
for these conditions.
When adjusting the thermometer
display, the cabinet should be working
and freezing should not be active.
Press the shut down button for the
Setting the temperature "+" and the "-"
button simultaneously and hold them
down for about 5 seconds. As
confirmation, the sound will buzz with
a short signal. The thermometer is now
set for display of warmer food
products. To return to normal display,
repeat the same process. As
confirmation, the buzzer will give off a
loud signal.
18
ACTIONFREEZE
--
Information: It is very important to
press the buttons at exactly the same
time.
Please observe that the display will not
change immediately. Instead, the
temperature of the cabinet will
successively change internally.
Switching off
Switch off the cabinet by pressing the
power switch.
Keep the button pressed for approx. 1
second.
18
ACTIONFREEZE
--
Power to the cabinet is completely
interrupted only when the power plug
is disconnected.
Temperature inside the freezer
To ensure that foodstuff will keep for a
long time, be sure that the temperature
inside the freezer is -18°C or below.
Please note, however, that the energy
consumption increases as the
temperature decreases.
The built-in temperature display shows
the warmest temperature inside the
freezer. If the temperature is measured
using a thermometer, put it between
the products since this will reflect the
real temperature in the frozen
products. It is normal that the built-in
temperature display shows a
temperature slightly above that
measured in other ways.