Filter
Top Products
You can wash the removable parts in very hot soapy water. You may use
mild abrasives. Make sure that the electrode and the hole and slots in the
crown are not blocked with food or cleaning materials.
Clean the burner crowns by soaking them in very hot soapy water.
You can remove any stubborn stains by scouring with a soap filled pad
such as 'Brillo'. If you look after the burner crowns in this way they will stay
reasonably clean. However the surface will dull with time.
Aluminium based saucepans can leave shiny metal marks on the pan
supports. Clean the pan supports regularly to remove the marks using a
mild abrasive like 'Cif' with a soft scourer. For more
stubborn marks you can use a soap filled pad such
as 'Brillo'. After cleaning the appliance parts, dry
them thoroughly before you put them back.
When replacing hotplate burner parts
1. Crown to body (Do not try to force the
crown on to the body).
Make sure that the hole in the crown is
centrally over the electrode. Check that the
two longer location pegs sit in the slots in
the body. When the crown is in the position
let it fall freely on to the body. Check that
the crown can be moved slightly from side
to side.
2. Cap to crown.
Place cap centrally on the top of crown
(enamel side up). Move sideways and front
to back to check the cap is properly fitted.
3. Check for ignition
If a burner will not light then you need to
check the crown and cap positions.
S I G 3 4 0
25
Care and cleaning