Electrolux TRIMKITEZ1 Appliance Trim Kit User Manual


 
INSTRUCTION SHEET
©2013 Electrolux Home Products, Inc. Instruction Sheet A00343901 11.04.13
12. Trim Kit Leveling (See Figure 16)
(Single and Dual Installations)
a. To raise front of unit, turn leg leveler to left with
adjustable wrench to fit 1-¼” hex.
b. To raise back of unit, adjust bolt clockwise with
3/8” socket or flat head screwdriver.
14. Side Trim Attachment to Kitchen Cabinets
(Single and Dual Installations)
a. Fasten bottom of side trim with screw.
(See Figure 17).
b. Fasten screws to top trim. (See Figure 18).
Figure 17
Figure 16
Leg Leveler
To raise back of
unit, adjust bolt
clockwise.
Phillips Head
Screws
3/8” Bolts
To raise or lower door,
adjust 7/16” bolt.
Figure 18
Figure 19
Figure 20
Screws
Screws
13. Hinge Adjustment (See Figure 16)
(Single and Dual Installations)
a. The bottom hinge is designed to make final
minor adjustments for door to door and door to
cabinet alignment.
b. Hinge will move side to side 3/32” and raise
up 1/8”.
Use a 7/16” socket or open end wrench to raise or
lower the door.
Use a 3/8” socket and a Phillips screwdriver to loosen
bottom hinge. Shift door left or right, then retighten
screws and bolts.
15. Kick Plate Attachment
(Single Unit) Attach the kick plate to the cabinet
with two (2) screws. (See Figure 19).
(Dual Unit) Attach the kick plate to the cabinet
with four (4) screws. (See Figure 20).