Filter
Top Products
22
Care & Cleaning (continued)
Wear gloves when replacing light
bulbs to avoid contact with any sharp edges.
REPLACING LIGHT BULBS
1. Unplug fridge-freezer.
2. Allow the bulb and glass to cool if your are replacing a
bulb which has only recently been illuminated.
3. Wear gloves as protection against possible broken
glass and heat.
4. Remove light cover, if necessary.
5. Unscrew and replace old bulb with an appliance bulb
of the same type and wattage.
6. Replace light cover, if necessary.
7. Remember to plug the fridge-freezer back in.
Fridge-freezer Light Replacement
Vacation and Moving Tips
Short
Vacations
• Leave refrigerator operating during vacations of 3 weeks or less.
• Use all perishable items from refrigerator compartment.
• Turn automatic ice maker off and empty ice bucket, even if you will only be
gone for a few days.
Long
Vacations
• Remove all food and ice if you will be gone one month or more.
• Turn the cooling system off ( see page 8 for On/Off button position) and
disconnect power.
• Turn off automatic ice maker and turn water supply valve to closed position.
• Clean interior thoroughly.
• Leave both doors open to prevent odours and mould build-up. Block doors open
if necessary.
Moving
• Remove all food and ice.
• If using handcart, load from side.
• Adjust rollers all the way up to protect them during sliding or moving.
• Pad cabinet to avoid scratching surface.
IMPORTANT: If the fridge-freezer is going to be stored or moved in freezing temperatures, the water in
the ice and water system must be drained completely. Failure to do so could result in water leaks when
the fridge-freezer is put back into service. Contact a service representative to perform this operation.
This will be a chargeable call.
Freezer Light ReplacementCrisper Light Replacement (Models may vary)
or