Filter
Top Products
D0693A
D0435
0107 16
9
Notice
Date
Page
01201138
INSTRUCTION
HANDBOOK
9. Installation
Installation of the exhaust of
burn gas
Connect the whole set of pipes on your
cheminey pipe, that is to say :
1 aluminium pipe (A) lenght 500 mm
(20") on the exchanger.
1 T-square (B) pipe + 1 regulator (C).
1 aluminium pipe (A) length 500 mm
(20") .
1 draught accelerator (D).
•
•
•
•
It is necessary to install the gas ex-
changer at the ground level.
Evacuation of burn gas from a machine with gas heating must never be
connected to the evacuation used for a dry cleaning machine or other ma-
chine of the same type.
Installation of the chemney regulator
For a correct running of the installation, this
chimney regulator must always have its axle
of rotation of his fl ap perfectly horizontal.
The adjustment toothed wheel has to be
positioned on the mark no 7.