Filter
Top Products
0107 67
11
Notice
Date
Page
01201138
INSTRUCTION
HANDBOOK
11. Machine
operation
Resetting the weighing equipment
If the display does not show the weight (in
an empty machine) as zero after a program,
the weighing equipment can be reset to zero
using the TAR key.
For a description of the functions used to set
and check the tare value, see the section
headed "Scale adjustments" under "Machine
operation".
Calibration the weighing equipment
The "Zero calibration" function is used to
increase the accuracy of the weighing equip-
ment. This should be done once a month.
See the section headed "Zero calibration"
under "Machine operation".
If a new scale unit is installed, it must be
calibrated as described in the section "Cali-
brate the scale" under "Machine operation".