Filter
Top Products
HOW TO USE..
Before using for the first time, remove all packaging materials and wash the Plunger,
Cover, Grater/Filter, Pulp Catcher, and Juice Cup with warm soapy water. Rinse and
dry thoroughly.
ASSEMBLY & OPERATION:
CAUTION: Be sure the unit is switched to OFF and unplugged before
beginning.
1. Place the Base on a dry level surface.
2. Place the hole in the bottom of the Pulp Catcher over the Gear. Position the
Catcher so that it rests in the groove on the Base.
3. Place the Grater/Filter onto the Gear. Be sure the Grater/Filter is seated on the
Gear before continuing.
4. Position the Cover onto the Pulp Catcher; the bottom of the Chute should sit
inside the Grater/Filter. Be sure the Cover rests in the groove on the Pulp
Catcher. Raise the Clamps to fit in the notches on the Cover. Press lower
portion of each Clamp towards the Base until they snap into place.
5. Slide the Juice Cup into place.
6. Plug the unit into an A.C. wall outlet.
7. Turn unit to ON and OFF once to be sure it has been assembled correctly before
beginning to extract juices.
EXTRACTING JUICES:
1. Hold the Plunger with one hand while adding food to the Chute with the other
hand. Insert the Plunger into the Chute as soon as you add the food and gently
press down on the Plunger. As food is processed, continue to add food to the
Chute. Do not turn the unit OFF to add food.
CAUTION: Keep hands and utensils out of the Chute while processing to
prevent the possibility of server personal injury and/or damage to the Juice
Extractor.
NOTE: 1) To prevent food from jamming, do not put food into the Chute
unless the unit is running. 2) Large Quantities: When the Juice Cup is ¾ full,
empty contents into a larger container. Empty the Pulp Catcher when it is
half full.
If food becomes jammed and cannot be dislodged quickly using the Plunger, follow
these steps to prevent damage to the unit:
a. Turn the unit OFF immediately and unplug from the electrical outlet.
b. Left the Clamps and remove the Pulp Catcher.
c. Remove larger pieces of food which have becomes lodged.
d. Reassemble unit and continue juicing.
2. When finished, switch the unit to OFF.
CAUTION: Be sure to unplug the A.C. cord when the Juice Extractor is not
being used.
CARE & CLEANING..
1. Be sure unit is completely assembled before using. Do not operate the unit
without the Pulp Catcher, Grater/Filter, Cover, Clamps, or the Juice Cup in
place. Do not remove Pulp Catcher or Cover from the Base when the motor
is running.
2. Remove all pits (peaches, plums, etc.), large seeds (melons, etc.), and
stems before placing food into the Chute. Thick peels (oranges, lemons,
grapefruit) should be removed. Items such as these may damage the unit
or change the taste of the juice.
3. Keep hands and utensils out of the Chute while processing to the prevent
the possibility of severe injury to persons or damage to the unit.
4. Unplug from outlet when not in use, and before putting on or taking off parts,
and before cleaning.
5. Clean spills promptly to make subsequent cleaning easier. Wipe the Base
and Electrical Cord with a damp cloth. Wash Plunger, Cover, Pulp Catcher,
Grater/Filter, and Juice Cup in warm soapy water and rinse thoroughly. To
remove pulp from Grater/Filter, hold Grater/Filter, bottom side facing up,
under running water and gently scrub with a soft nylon brush.
CAUTION: To protect against risk of electrical shock, do not put the Base in
water or other liquids.
Note: Do not clean any part of the Juice Extractor with an abrasive cleaner. Do
not put any part of the Juice Extractor into the dishwasher or boiling water.
6. Stains: Certain fruits and vegetables may stain white parts of the Juice
Extractor. To remove stains: soak in a solution of 1 cup household bleach
and 1 cup sudsy water. When clean, wash and rinse thoroughly.