Elta TT100 Hot Beverage Maker User Manual


 
• Press down the On/Off switch (8). The control lamp is glowing and the appliance is switched on.
• As soon as the water has boiled, the appliance is switched off automatically. The On/Off switch (8)
goes off automatically and the control lamp stops glowing.
• The water can be poured through the muzzle, without prior opening of the lid. The filter (11)
prevents the passage of lime residues etc. with the water.
• To end the heating process earlier, i.e. to interrupt the heating, press the on/off switch (8) up.
• The jug (2) can be used to make tea without another hot liquid.
• Open the lid (13). Fill the tea strainer (1) with tea leaves and pour hot water over them. Leave the
tea to draw and remove the tea strainer. Close the lid and turn on the heating plate (4) by pressing
the red function switch I/O (3). The switch starts to glow. The tea, or the liquid in the jug, will be
kept at a temperature of about 70°C.
• If the liquid in the jug only covers the bottom, the warm-keeping function must be turned off by
pressing the red switch I/O (3), to avoid damage to the jug. The control lamp in the function switch
(3) will stop glowing.
CLEANING AND MAINTENANCE
• You must take note of the SAFETY INSTRUCTIONS.
• Before cleaning the base unit, remove the plug (7).
• Before cleaning, leave the brewer to cool completely.
• Clean the appliance casing and the tray using a damp, soft cloth, and a mild cleaning agent.
• Do not use scouring agents or sharp objects.
• The filter (11) can be removed. Rinse the filter under flowing water and put it back in place in the
brewer.
• Decalcify the appliance on a regular basis. Use a decalcifying agent available at retail outlets and
follow the manufacturer’s instructions. Instead of decalcifying agents, you can use a vinegar
solution (1/3 vinegar and 2/3 water).
• Leave the mixture in the refrigerator to take effect for a night. Empty the mixture the following
morning.
• Fill with fresh, clean water and leave it to boil again.
• Empty the water, which may contain vinegar and lime residues. Rinse the brewer with clean water.
• Cleanse the tea strainer (1) after emptying with hot water alone.
• Rinse the jug (2) carefully, using a mild cleaning agent and hot water.
TECHNICAL DATA
Operating voltage: 220 - 240 V~ 50Hz
Brewer
Power input: 2200W
Capacity: 1.8 Liter
Warm-keeping function
Power input: 35W - 40W
Jug Capacity: 1.5 liters.
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has
occurred during production or transportation, please return the device to your dealer. In addition to
statutory legal rights, the purchaser has an option to claim under the terms of the following
guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day of sale. During
this period we will remedy all defects free of charge, which can be demonstrably attributed to
material or manufacturing defects, by repair or exchange.
Defects which arise due to improper handling of the device and malfunctions due to interventions
and repairs by third parties or the fitting of non-original parts, are not covered by this guarantee.
7 8
GB
GB
GB
GB
approved