WARNING: This equipment generates and uses ISM frequency energy and if not installed
and used properly, that is in strict accordance with the manufacturer's instructions, may
cause interference to radio and television reception.
It has been type-tested and found to comply with limits for an ISM Equipment pursuant to
part 18 of FCC Rules, which are designed to provide reasonable protection against such
interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following.
* Reorient the receiving antenna of radio or television.
* Relocate the Microwave oven with respect to the receiver.
* Move the microwave oven away from the receiver.
* Plug the microwave oven into a different outlet so that microwave oven and receiver are
on different branch circuits.
THE MANUFACTURER is not responsible for any radio or TV interference caused by
UNAUTHORIZED MODIFICATION to this microwave oven. It is the responsibility of the
user to correct such interference.
If you see arcing, press
Arcing is the microwave term for sparks in the oven.
Arcing is caused by:
* Metal or foil touching the side of the oven.
* Foil not molded to food (upturned edges act like antennas).
* Metal, such as twist-ties, poultry pins, or gold rimmed dishes, in the microwave.
FEDERAL COMMUNICATIONS COMMISSION RADIO
FREQUENCY INTERFERENCE STATEMENT
button and correct the problem.
5
ARCING
STOP/CLEAR
DO NOT LEAVE OVEN UNATTENDED WHILE COOKING!
SAVE THESE INSTRUCTIONS
* Recycled paper towels containing small metal pieces being used in the microwave.
* Burnt (carbonated) food residue or grease spattered inside of cabinet.