Emerson FR24RD Beverage Dispenser User Manual


 
Troubleshooting Guide:
You can easily solve many common problems by trying the suggestions below:
SYMPTOM
POSSIBLE CAUSE
Vibrations
Check to make sure the wine cooler is on a level surface
The door will not close
properly
The wine cooler is not on a level surface
The racks are out of position
Fan is always running.
This is simply a function of the cooling system. The lower the
setting, the more the fan will run. If the room is warmer than 77°F
(25°C), it will run more
The unit has been designed to run continuously when operating
at the lower temperatures
Unit has no power.
Check the wall outlet for power. Make sure the outlet is not
controlled by a wall switch
The inside temperature
does not seem correct
Make sure the cooling vents on each side of the cooler are not
obstructed. Have at least 5 inch (15cm) of space on each side of
unit.
The unit will have difficulty in cooling if the set temperature is
32°F (18°C) below the ambient temperature.
Example: if the ambient temperature is 86°F (30°C), the unit
will have difficulty cooling to 54°F (12°C).
When using the unit for the first time, it can take up to 24 hrs to
reach the desired temperature
The unit does not
operate
It may not be plugged into the wall socket
Make sure the wall socket is functional by testing another
electrical appliance in the power socket
Make sure the circuit breaker is not tripped or a fuse is blown
There is a puddle of
water under / around the
wine cooler
This wine cooler features a self-evaporation system. An external
drip tray is therefore not required for accumulating condensation.
If water forms under / around the wine cooler, the humidity level
in the room is too high. Either try to lower the humidity level in the
room (using for example a dehumidifier) or place the wine cooler
in an another room
The unit will not cool.
Power is On.
Make sure there are at least 3-5 bottles in the unit.
Allow at least 24 hours for the internal temperature to adjust
properly.
*Because of technological limitation , the interior temperature can be
set between 44°F (7°C) and 66°F (19°C) on the control panel only at
the room temperature of 77°F (25°C)
To achieve accurate temperature control, the unit should not be used
or operated in any of the following locations:
in a sunny place
in a room with poor air circulation such as a garage
near another heat producing appliance (dishwasher, oven,
refrigerator).
with an outlet shared with a refrigerator as it will drain power from
the unit.
built-in a wall recess, niche or cabinet.
-5-