Estate TT18HD Refrigerator User Manual


 
,Ch&nging.the light b,ulbs
Electrical Shock Hazard
Before removing
a
light
bulb, either
unplug the refrigerator or disconnect the
electricii leading to the refrigerator at
the main power supply.
Failure to do so could result in electrical
shock or personal injury.
To
change the refrigerator light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Panel to remove
bulb.
3. Replace with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs will
fit your refrigerator. Be sure to replace a bulb
with one of the same size and shape.
Removing the bask grille
To remove the grille:
1. Open refrigerator door.
2. Pull base grille forward to release the
Condenser coils
support tabs from the metal clips.
3. Do not remove Tech Sheet fastened
behind the grille.
To replace the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close refrigerator door.
See cleaning instructions for defrost pan and
condenser coils on page
17.