Filter
Top Products
STORAGE
The food processing center
is designed so that most of
the attachments can be
stored on-board.
Storage Compartment
1. Lift the lid of the storage
compartment (7).
2. Place whisk head (26) in
storage compartment as
shown.
3. Place the protective cover
(24) onto the chopping
blade (23) and place into
storage compartment. The
highest part of the blade
should be placed at the
back of the compartment.
4. Push shaft of whisk beater
(27) firmly into the hole.
5. Close the lid of the storage
compartment.
Storage Dome
1. Fit the processor bowl (11)
& processor lid (13) onto
the processor base.
2. Place the the storage
dome (15) onto the
processor lid.
3. Add the spindle (12) into
the circular hole in the
storage dome.
4. Place the plastic blade
holder (17) & French fry
blade(22) into the two
longer slots.
5. Add the slicing blades
(20, 21) & the shredding
blades (18, 19) into their
slots in the storage dome.
Spatula Storage
Slide the spatula (16) into the
slot provided on the side of
the processor body (1).
Cord Storage
The power supply cord can
be stored by feeding it into
the opening at the back of
the food processor body.
3