Filter
Top Products
CONTENTS
2
Important Safeguards …………………………………………………………..
Special Safety Instructions …………………………………………………….
Main Components ……………………………………………………………...
Using for the First Time …………….………………………………………….
Prior to First Use, Clean the Unit Thoroughly …….………………………….
Filling the Stainless Steel Container With Oil …………..…………………….
Using Solid Fat …………..………………………………………………………
Installing the Control Panel Into Its Place ……..……………………………...
Using the Electronic Deep Fryer ……………………………………………….
Pre-Heating ………………….…………………………………………………..
Filling the Frying Basket ……….……………………………………………….
Frying Food …………………………………….………………………………..
At the End of Cooking ………………….……………………………………….
Frying Tips ……………………………..………………………………………...
Temperature Settings …………………………………………………………..
Filtering and Changing the Oil ………………………………….……………..
Connecting the detachable Power Supply Cord …………………………….
Cleaning Instructions ……………………….…………………………………..
How to Reset the Deep Fryer ………………………………………………….
Helpful Hints ……………………………………………………………………..
1
1
3
4
4
4
5
5
5
6
7
7
7
7
8
8
9
9
9
10
9
OPERATING INSTRUCTIONS
Warning: Always remove the plug
from the wall socket before cleaning.
Allow the deep fryer and the oil to cool
completely (approximately 2 hours)
before cleaning. Never immerse the
control panel, cord or plug in water or
any other liquid.
• Follow the cleaning
instructions on page 4. (Before using
for the First Time)
• Never immerse the
control panel, cord or
plug in water or any other liquid.
• Do not place the
control panel, cord or plug
in the dishwasher.
• Clean the control panel
only with a damp cloth.
• The oil container,
frying basket, lid cover and filter can be
washed in the dishwasher.
• The body of the deep
fryer can be washed in warm soapy
water. Do not
put the body of the
deep fryer in the dishwasher.
Cleaning InstructionsConnecting the Detachable
Power Supply Cord
Your deep fryer has been specifically
designed with your safety in mind. This
unit has a unique detachable power supply
cord. This power supply cord is designed
to “Break Away” from the fryer body in the
event that the supply cord is inadvertently
pulled. This is intended to prevent the
tipping of the appliance and hazardous
spillage of hot oil.
The female receptacle portion of the power
supply cord is permanently attached to the
rear of the the control panel. To connect
the male power cord plug to the female
receptacle on the appliance, orient the
male plug so that it mates with the female
receptacle. The male plug can only be
inserted one way. If the male plug will not
go into the receptacle on the appliance,
rotate the male plug 180° and insert again.
Important: Should the male plug become
detached from the appliance during use, it
is important to:
1. Unplug the power cord from the wall
outlet.
2. Turn off the appliance at the control
panel.
3. Re-attach the power cord to the
appliance.
4. Re-connect to power outlet.
5. Turn the appliance back on.
• Push the thermostat re-set button
located on the back of the control
panel. (Fig. 8) The unit will beep to
indicate that it has re-set.
If for some reason the deep fryer stops
heating, the reason might be that the
safety re-set switch has tripped. To
re-set the the deep fryer, follow the
instructions listed below:
How To Reset the Deep Fryer
RESET
Reset
Fig. 8