Filter
Top Products
OPERATING INSTRUCTIONS
GETTING TO KNOW YOUR QUAD-BLADE BLENDER
Helpful Hints
• Always operate the blender with the
blender cover on.
• Always hold the bender jar with one
hand while processing.
• To ensure proper blending and to
prevent overflow, add ingredients to the
blending jar a little at a time.
• Never fill blender jar more that 3/4 full -
the blade action will cause the
ingredients to rise in the blender jar.
Blend large quantities in several
batches.
• Unless your recipe says otherwise, pour
liquid ingredients first into the blender jar
before solid ingredients. The liquid will
help the processing go much faster and
allow the blender to operate at a more
efficient rate.
• Do not use blender continuously for an
extended amount of time, (no more than
four (4) minutes running time without
cooling down).
• Do not remove the blender jar from the
power base while the motor is running.
• To prevent the possibility of severe
injury or damage to the appliance,, keep
hands and utensils out of the blender jar
while processing. A scraper may be use
only when the blender is not working.
• Do not store food or beverages in the
blender jar.
• Even though the blender is a versatile
appliance, it will not mash potatoes,
beat egg whites, extract juice from fruits
or vegetables, grind raw meat or knead
dough.
• When grating hard cheese, cut into
small cubes and put small amounts into
the jar. Cover the jar and process on
high speed. Do not overload. Use the
pulse button and process until it reaches
the consistency that you desire.
• When processing solids, always cut
food into 1"-2" sized pieces before
blending.
• Use extreme caution when
processing hot foods to avoid
accidental scalding or burns. When
processing hot foods, always remove
the measuring cap from the blender
cover before beginning.
Maintenance
This blender requires no maintenance. It
contains no user-serviceable parts inside
the motor housing. Do not remove the
motor housing cover. Contact EURO-PRO
Operating LLC if this product needs
servicing.
Cleaning
NEVER IMMERSE POWER BASE IN
WATER OR ANY OTHER LIQUID.
1. Turn blender "Off".
2. Unplug blender from electrical outlet.
3. Remove the blender jar from the power
base.
4. Disassemble the blender jar and wash
in warm soapy water. Use extreme
caution when handling the blade
assembly.
5. Wipe the power base with a damp
cloth. Dry completely with a soft cloth.
Storage
Caution: Always assemble blender
parts correctly before storing the power
base.
1. Unplug and clean unit.
2. Wrap power cord counterclockwise
underneath the power base. (Fig. 5)
Note: Do not store the blender with the jar
cover in place.
Fig. 5
6. Retainer Ring
7. Power Base
8. Pulse Button
9. On/Off - Progressive
Variable Speed Control Dial
1. Measuring Cap
2. Blender Jar Cover
3. Glass Blender Jar
4. Rubber Gasket
5. Blade Assembly
Technical Specifications
Voltage: 120V., 60Hz.
Power: 700 Watts
Jar Capacity: 48 oz.
2
5