Filter
Top Products
5
OPERATING INSTRUCTIONS
How To Attach the Hand Mixer to
the Stand
• The stand for the Power Mixer has
two tabs on top. (Fig. 1)
• The power mixer has two slots
next to the holes for inserting the
attachments. (Fig. 2)
• Hold the power mixer in your right
hand at an angle. Slide it from left
to right securing the two tabs on
the stand into the two slots on the
power mixer. (Fig. 3)
• Push the power mixer down on
the stand to engage the lock
(Fig. 4) that secures the power
mixer to the stand. (Fig. 5)
Note: To lock the power mixer onto
the stand more easily, push the lock
release button as you are lowering
the power mixer down onto the stand.
(Fig. 6)
Fig.1
Fig.2
Fig.3
Fig. 4
Fig.5
Fig.6
6
OPERATING INSTRUCTIONS
How To Remove the Hand Mixer to
the Stand
• To remove the power mixer from
the stand, push the lock release
button and lift the power mixer
upwards. (Fig. 7)
• In order to lift the power mixer
while it is still on the stand, push
the locking button and pull the
power mixer upwards. (Fig. 8 & 9)
Fig.7
Fig. 8
Fig. 9
CLEANING & STORAGE
• Ensure that the mixer is
unplugged and switched off before
removing and cleaning the
attachments.
• Wash the beaters and glass bowl
in warm, soapy water or
dishwasher.
• Clean the stand by wiping with a
damp cloth.
• Never immerse the power mixer in
water or any other liquid.
• Push the cord rewind button while
holding the plug for the cord to
rewind.
• You can store 1 set of the
attachments on the side of the
stand for easier storage.
Caution: Do not pull with force on
the power cord or you will damage
the rewinding feature and void the
warranty. When rewinding, always
hold the plug to avoid cord whipping.