Filter
Top Products
12
13
INTRODUCTION
To get the best out of your new appliances, please read
this user guide carefully before using them for the rst
time. Take particular note of the safety precautions.
We also recommend that you keep the instructions for
future reference, so that you can remind yourself of the
functions of your appliances.
SAFETY MEASURES
Normal use of the appliances
• Incorrect use of the appliances may cause personal
injury and damage to the appliances.
• Use for their intended purposes only. The
manufacturer is not responsible for any injury or
damage resulting from incorrect use or handling
(see also Guarantee Terms).
• The kettle may only be connected to 230 V, 50 Hz.
• The kettle may only be used with the base station
supplied.
• For domestic use only. Not for outdoor or
commercial use.
• Remove the plug from the socket once you have
nished using the kettle.
• Please note that the kettle will remain hot for a
while, after you switch it off. Always allow the
appliances to cool completely before you put them
away or clean them.
• The kettle or cord must not be placed in water or
any other liquid.
• The kettle should not be switched on unless there is
water in it.
• The water level in the kettle must not be below
“MIN” or above “MAX”. Check water level using the
external water level indicator.
• Keep the appliances under constant supervision
while in use. Keep an eye on children.
• Avoid touching the outside of the appliances when
in use and immediately after, as they become hot.
Touch the handle and lid only. Be careful of hot
steam when opening the lid.
• Never touch the kettle or base station if your hands
are wet or damp.
Positioning of the appliances
• Always place the appliances on a level, dry, stable
and heat-resistant surface.
• Always place the appliances at the back of a kitchen
counter and at a safe distance from ammable
objects such as curtains, tablecloths or similar.
• The appliances must not be placed or stored near
other sources of heat.
• Do not cover.
Cord, plug and mains socket
• Check regularly that neither the cord nor plug is
damaged and do not use the kettle if there is any
damage, or if it has been dropped on the oor,
dropped in water or damaged in any other way.
• Remove the plug from the socket when cleaning, or
when the kettle is not in use. Avoid pulling the cord
when removing the plug from the socket. Instead,
hold the plug.
• Do not allow the cord to hang over the edge of a
table/counter, and keep it away from hot objects
and naked ames.
• Check that it is not possible to pull or trip over the
kettle or any extension cord.
• Check the wire in the base ts into one of the small
incisions in the edge to ensure the base station is
stable, and not standing on the wire.
• If the appliance or plug is damaged, it must
be inspected and if necessary, repaired by an
authorised repair engineer, otherwise there is a risk
of electric shock. Never try to repair the appliance
yourself. Please contact the store where you
bought the appliance for repairs under guarantee.
Unauthorised repairs or modications to the
appliance will invalidate the guarantee.
KEY TO MAIN COMPONENTS OF THE APPLIANCES
1. Spout
2. Filter (in spout)
3. Lid
4. Opening button
5. Water level and on/off
indicator
6. On/off button
7. Handle
PRIOR TO FIRST USE
Before using for the rst time
(or after a long period of storage), ll and boil the kettle
three times before using. Follow the directions in “How
to use the kettle” below.
HOW TO USE THE KETTLE
1. Open the lid (3) by pressing the opening button (4).
2. Pour fresh water into the kettle. Fill the appliance
with water at least to the minimum mark (“MIN”) and
not exceeding the maximum mark (“MAX”) on the
water level indicator (5)
3. Close the lid and ensure it clicks into place.
4. Place the kettle on its base station (14) by
positioning it so the stud on the base (10) ts into
the hole on the underside of the kettle.
UK