Filter
Top Products
Eng l i s h
English
27
27
ICT-0 1
ICT-01
Using the keys you can change and set the quantity of
ground coffee to make the fl avour of the coffee the desired stren-
gth. The scale of variation ranges from -5 to +5 (0.1 sec.). The 0
position corresponds to the optimal factory setting.
COFFEE TEMPERATURE
Press the key and the display panel shows:
Using the keys
you can change and set the temperatu-
re of the coffee. The scale of variation ranges from 14° to +50° F .
The 0 position corresponds to the optimal factory setting.
HOT WATER TEMPERATURE
Press the key
and the display panel shows:
Using the keys
you can change and set the tempera-
ture of the hot water. The scale of variation ranges from 14° to +50°
F. The 0 position corresponds to the optimal factory setting.
STEAM TEMPERATURE
Press the key
and the display panel shows:
Using the keys
you can change and set the temperatu-
re of the steam. The scale of variation ranges 14° to +50° F. The 0
position corresponds to the optimal factory setting.
Press the key
to exit the programming function.
SETTING THE GRIND
A number of factors help you to understand whether the grinding
level needs to be adjusted:
• If the coffee is dispensed too quickly, this means that the beans
have been ground too coarsely.
• If the coffee comes out in slow drips, this means that the beans
have been ground too fi nely. A very important factor for ensuring
a good coffee is the right setting for the grinding level, which is
factory-set but can also be modifi ed as follows:
• Open the machine.
• Carefully turn the dial located on the left side of the machine “A”
(Fig.5).
Turning the dial clockwise produces a fi ner grind; turning it anti-
clockwise produces a coarser grind.
Note: Turn the dial min. 3 complete turns, clockwise or anti-
clockwise, to obtain a change in the degree of grinding, fi ner or
coarser.
COFFEE TEMPERATURE
0
WATER TEMPERATURE
0
STEAM TEMPERATURE
0
A
IMPORTANT !! After setting the new grind, it is necessary to
dispense at least 2 coffees.
SELECTING THE TYPE OF ESPRESSO
Using the key you can select from among the following types of
espresso dose:
SHORT
NORMAL
LONG
ADJUSTING THE ESPRESSO DOSE
To change and memorize the quantity of coffee, proceed as follows:
• During the infusion, press and hold the key
until the desired
quantity (coffee dose) is reached.
The display shows the message “MEMO ?”
If you want to memorize the dosage of coffee just made, proceed
as follows:
• To memorize, as soon as the infusion is fi nished, use the key
to select the type of coffee (short, medium, or long) on
which to memorise the new setting.
• Press and hold the key
again until you hear the beep of
confi rmation.
Now the new quantity of coffee is memorized and associated with
the type of coffee selected.
SETTING 1 OR 2 COFFEES
With this machine you can prepare a single coffee or 2 coffees
simultaneously.
Make your selection using the key
COFFEE 1 SHORT
WATER MEMO ?