Filter
Top Products
Use & Care Manual
Model COGB ENGLISH
7
Gas Cooktop Operation
Gas Control Knob Setting
Electric ignitors automatically light the surface burners
when control knobs are turned to LITE.
Before setting a control knob, place filled cookware on
the grate.
Do not operate a burner using empty cookware or
without cookware on the grate.
To set:
1. Push in and turn knob counterclockwise to LITE.
All four surface burners will click.
Only the burner with the control knob turned to
LITE will produce a flame.
2. Turn knob anywhere between HI and LO.
Use the following chart as a guide when setting
heat levels.
Model with automatic re-ignition
This appliance is equipped for electronic auto-
reignition by means of a spark igniter located near
each burner.
The burners are designed to light at any valve rotation
that admits sufficient gas flow to support a flame and
to automatically relight following a loss of flame due to
a draft or other adverse condition.
This feature is provided as a convenience and is not
intended as a safety feature.
The cooktop uses an electronic igniter to light the
burner.
Each burner has its own igniter that sparks when any
burner is turned on.
When the igniters are clicking (sparking) do not touch
burners.
If any burner flame blows out, the electronic igniter
automatically sparks on all burners to relight the
flame.
Setting Recommended Use
LO
LO
MED
MED
HI
HI
00
2
LITE Light the burner.
HI Start food cooking.
Bring liquid to a boil.
Medium HI Hold a rapid boil.
Quickly brown or sear food.
To fry chicken.
MED Maintain a slow boil.
Fry or saute foods.
Cook soups, sauces and gravies.
Medium LO Stew or steam food.
Simmer.
LO Keep food warm.
Melt chocolate or butter.
WARNING
Do not let the burner flame extend beyond the
edge of the pan. Turn off all controls when not
cooking. Failure to follow these instructions can
result in death or fire.