Filter
Top Products
13
SRM WITH AN EXTERNAL POWER AMP FOR FRONT OF HOUSE SPEAKERS
1. Connect a cord from the Main Out jack to an
external power amp. Be sure one monitor enclosure
is connected to a PA 1 Out jack and the other is
connected to a PA 2 Out jack. (PA 1 power amp can
now be assigned to monitor speakers by connecting
a small, shielded jumper cable from the Mon Out jack
to PA 1 In. Next, connect the PA2 power amp to
Monitor Out by placing the PA2 Assign switch to the
Mon position. The Monitor control will now adjust
volume for both PA 1 and PA 2.)
2. The Main control in the master section adjusts
the signal level to your external power amp.
3. Be sure to turn your tape deck, keyboard or
other instruments and gear on first, then your SRM
6302 / 8302 and external power amplifier.