Filter
Top Products
2
Installation Instructions
Flush fitting installation options
c
b
a
20 mm
2.5 mm
20 mm
2.5 mm
20 mm
2.5 mm
CUPBOARD FRONT
DRAWER FRONT
Installation instructions
1
Check that the oven cavity is square
and within the limits in the installation
dimensions.
2
Remove the mains wiring access cover.
3
Connect the mains wiring and replace the
access cover.
4
Remove the oven door and accessories, lift
and slide oven into place. When installing
the oven it is essential to centre the product
in the cavity giving a spacing of 2.5mm from
the door edge to the joinery
5
Secure oven in cavity using the four ‘wood
screws’ and washers supplied through the
enamelled frame at either side of the oven as
shown in the flush fitting installation options.
6
Test then refit the door and accessories,
check that the oven is firmly secured in the
kitchen unit.
Installing a cooktop above an oven
If installing a cooktop above the oven ensure
adequate clearance is provided for the
cooktop as per the Cooktop Manufacturers
Instructions.