Filter
Top Products
11
Installation instructions
Fastening the cooktop to the bench
1
Turn the cooktop upside down and place it on a soft surface.
2
Spread the seal around the edges, with the adhesive side facing down.
3
Mount the supplied front and rear clamps (F and R) and screws (S) onto the cooktop, as shown
(without tightening the screws).
4
Place the cooktop into the cutout, then tighten the screws to clamp the cooktop securely to the
bench.
5
Using a sharp cutter or trimmer knife, trim the excess sealing material around the edge of the
cooktop. Take care not to damage the benchtop.
Note: if your bench is thicker than 40 mm, recess the underside to between 30 and 40 mm.
Fig. 3 Preparing the cooktop before installation
Fig. 4 Fastening the cooktop to the bench
min
S
A
R
min
A
F
S
REAR CLAMPS FRONT CLAMPS
40 mm
40 mm
30 mm
30 mm
30 mm
30 mm
R
F
F
R
S
Seal
REAR
FRONT
S
S
S
Adhesive side