Filter
Top Products
20
When Auto Heat-reduce is set
If you would like a lower or higher heat setting than you originally selected, simply slide to the
new setting and hold until the A starts flashing. Alternatively, wait until A stops flashing and
then modify the heat setting.
To quit the Auto Heat-reduce setting while A is flashing
Either touch or slide the setting selector to a new setting or to 0 to turn the cooking zone off.
Note:
The Auto Heat-reduce and PowerBoost features cannot be used together. If you turn
PowerBoost on when Auto Heat-reduce is already set, the Auto Heat-reduce will cancel and
PowerBoost will stay on.
Using your cooktop’s special features
Then, when the period of highest setting
is over, A will stop flashing and the
cooking zone will automatically reduce
the heat to your pre-selected lower
setting.
Pre-selected lower heat setting
Approx. length of time at highest setting
1 40 seconds
2 1 minute
3 2 minutes
4 3 minutes
5 4 minutes
6 7 minutes
7 2 minutes
8 3 minutes
Initially, while the cooking zone is
at the highest setting, A will flash
alternately with your selected lower
setting. The length of time at the
highest setting depends on the lower
heat setting selected. See chart below.