Filter
Top Products
28
If no pan is detected on one cooking zone:
The left hand display will still show the selected temperature and the right hand display will still
show
.
If after 10 minutes no pan is detected:
the bridging function will switch off.
the cooking zone without a detectable pan will turn off.
the remaining cooking zone will continue cooking at the selected heat setting.
Using Automatic Cooking in bridged mode
1
Bridge the cooking zones by touching both setting slectors (anywhere) simultaneously.
2
Using the left hand setting selector, select the heat setting.
3
Hold your finger on the control at the selected heat setting until A flashes alternately with the
selected setting.
To cancel bridging
At the same time, touch the setting selectors of both bridged cooking zones.
The bridging indicator lights will go out.
Note: Sliding the scale down to 0 will not turn off bridging.
Note: Cancelling bridging will also cancel the timer for those cooking zones.
Using the timer in bridged mode:
You may only set one timer for the bridged cooking zone. See ‘Setting the timer’.
The timer indicator
will show in both displays.
Using your cooktop’s special features