Filter
Top Products
2
1
1
3
3
optional
(x2)
30 mm
1
2
3
4
5
5
5 ”
(
150 mm)
2
1
1
3
3
optional
optional (x2)
If top mounting brackets are being
used, ensure they’re securely fitted
before sliding product into cavity.
If top mounting brackets are being
used, ensure they’re securely fitted
before sliding product into cavity.
Ensure hoses and
cord are not kinked
or twisted.
Ensure hoses and cord
are not kinked or
twisted.
Loosen feet only and take
care when pushing the
product into the cavity that
you do not bend the feet.
When feet are extended,
take care when pushing
the product into the cavity
that you do not bend the
feet.
Ensure the drawer is
removed and then rotated
counter-clockwise
to prevent kinked hoses.
5 ⁄”
(
150 mm)
MOVE INTO THE CAVITY
REMOVE THE DRAWER
ATTACH SIDE MOUNTING BRACKETS
MOVE INTO THE CAVITY
8
9
8
9
SECURE WITHOUT DRAWER REMOVAL (FRAMELESS CABINETRY ONLY)
SECURE BY DRAWER REMOVAL
Clip all four side mounting brackets into their
slots using a flat-bladed screwdriver. Ensure
they’re securely fitted before sliding product
into cavity.
The mounting slots are in pairs, one on each side
diagonally across the product. A bracket must
match A slot and B bracket must match B slot.
(1,2) -2- 599632C DD24D TALL installA2 USCA.indd 15/4/09 11:51:16 AM
(1,2) -2- 599632C DD24D TALL installA2 USCA.indd 15/4/09 11:51:16 AM