Fisher & Paykel DD36STI Dishwasher User Manual


 
If, after installation, the front panel of your DishDrawer is not correctly aligned with the front panels of surrounding cabinetry, it can be adjusted as follows.
SAFETY AND WARNINGS
1
WARNING!
Electrical shock hazard
WARNING – To reduce the risk of electric shock, fire, or injury to persons, the
installer must ensure that the DishDrawer® is completely enclosed at the time of
installation.
Before fitting the front panel and connecting the controls, make sure that the
DishDrawer® is completely enclosed by cabinetry, and disconnected from the
power supply.
The controls must be electrically connected by a suitably qualified installer.
Failure to follow these warnings may result in electrical shock, injury or fire.
WARNING!
Cut hazard
Take care - panel edges are sharp.
Failure to use caution could result in injury or cuts.
Important safety instructions!
Read these instructions completely and carefully.
Ensure the product is not plugged in.
Installation of DishDrawer® panels requires basic mechanical and electrical skills.
Installation must comply with your local building and electricity regulations.
Failure to install the Dishdrawer® panels correctly could invalidate any warranty or liability claims.
DishDrawer®
Front panel adjustment (Pre nished models only)
DD36SDFTX, DD90SDFTM, DD90SDF(H)TX models
US CA NZ AU GB IE
Important!
SAVE THESE INSTRUCTIONS
The models shown in this document may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our local
website listed at the end of this document or contact your local Fisher & Paykel dealer.
(1,1) -2- 590018A DD36SDD90S DoorPanelPrep USCANZGB.indd 22/2/10 1:50:34 PM
(1,1) -2- 590018A DD36SDD90S DoorPanelPrep USCANZGB.indd 22/2/10 1:50:34 PM