Filter
Top Products
4
Product preparation
Single DishDrawer models
A
B
Installation diagrams for illustration purposes only
The following calculations assume the top of the panel is aligned with the top of the adjacent
cabinetry:
width of the panel
Measure
A (
the width between adjacent door/drawer fronts) and write it in the rst box below,
then complete the equation.
i.e 600 mm - 2 x 2.5 mm = 595 mm - 2 x =
height of the panel
Measure
B (
door/drawer height (or equivalent)) and write it in the rst box below,
then complete the equation.
i.e 407 mm - 9 mm = 398 mm - 9 mm Air gap =
Note: when the top of the DishDrawer® has to be lower than the adjacent cabinetry, the panel can be increased
in height.
min. 2.5 mm
width of panel
min. 2.5 mm
9 mm
Air gap
min. 5 mm
min.
5 mm
9 mm
Air gap
panel
height of panel
A
door clearance panel width
A
panel widthdoor clearance
(min. 595 mm)(min. 2.5 mm)
B
panel height
Air gap
B
panel height
(min. 398 mm)