Filter
Top Products
You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable
settings before you start using your dishwasher.
How to change the setting of an option
1
CHECK & OPEN
Check that there is no wash underway, press , then open the drawer.
2
ENTER MENU & SCROLL TO OPTION
To enter the menu: press the selector on top first with one finger, then the button on the front with another finger, hold both
until one long beep sounds, then release.
You are now in the Rinse aid option of the preference options menu.
If you want to change the Rinse aid setting, go to step 3 now.
If you want to change the setting of another option, you will need to scroll to that option first.
To scroll to the next option: press . To know which option you’re in, watch the letters in the display (see table below).
When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).
3
CHANGE SETTING
Press to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2,
you need to press 3 times.
4
SAVE SETTING & QUIT MENU
Press . This will save the new setting and quit the preference options menu.
Option Rinse aid
Water
softener*
Open drawer
auto power-on
Beeps at end
of wash
Closed drawer
autolock
Which option
am I in?
Possible
settings
1 to 5 0 to 5 On or Off On or Off On or Off
Example
4 indicators lit = setting is 4
On On On
Off Off Off
During and after the wash
Dos and don’ts of loading
As the wash progresses, the display will count down the minutes remaining and show what stage the program is at (different
programs will go through different stages). When the program has finished, the display will show and the dishwasher will
beep six times.
You may notice the following noises at the end of the wash. These are all part of normal operation:
In double models, both drawers may be draining simultaneously.
The drying fan may continue to run after a wash program has finished for a set time or until the drawer is opened. The fan assists
with drying and uses negligible amounts of energy.
For best drying results, we recommend unloading the dishes once they have cooled.
A neatly arranged load with evenly
spaced dishes helps wash performance.
Sharp or pointed items must be placed
horizontally or with sharp edges/points
facing down to avoid risk of injury.
Overcrowding reduces wash
performance.
Protruding items will stop the
internal lid of the dishwasher from
sealing properly, which could result
in a service call.
Ensure there is enough space between
plates. Mix spoons, knives and forks
within the cutlery basket to prevent
them from nesting.
If plates and cutlery are nesting,
they are less likely to be cleaned
well.
Ensure that water reaches all items on
the adjustable racks.
Dishware is blocking water from
reaching items on the adjustable
racks.
Dirty dishes Pre-rinsing Washing Rinsing Drying
These lines may remain on after
the program has finished to
indicate that the drying fan is
still running.
min
For more info
For detailed information on the
features of your dishwasher
For warranty information
If you…
have any questions or comments
need a Fisher & Paykel authorized
technician to service your product
need replacement parts or accessories
want to register your product
see your ‘User guide’
see your ‘Service and warranty’ booklet
see your ‘Service and warranty’ booklet or contact us
GB toll-free, 24/7 0845 066 2200 www.fisherpaykel.co.uk
IE toll-free, 24/7 1800 625 174 www.fisherpaykel.ie
590192B 11.12
Option Rinse aid
Water
softener
Open drawer auto
power-on
Beeps at end of
wash
Closed drawer autolock
What does
it do?
Regulates the amount of rinse
aid dispensed. Reduce this
setting if there is excess foam
after a wash. Increase this
setting if dishes are wet or
streaky after a wash.
Refer to
the ‘Water
softener’
section of the
‘User guide’ for
details.
Your dishwasher
is factory-set to
automatically power
on for 30 seconds
whenever you open
the drawer.
You can turn this
setting off.
Your dishwasher is
factory-set to beep
six times at the end
of a wash.
You can turn this
setting off.
When this setting is on,
the drawer will
automatically lock 30
seconds after it’s closed.
It can then be unlocked by
pressing
(unless Keylock
or Childlock is also activated).
Useful in boats or motor
homes.
Preference options