Fisher & Paykel E415H Refrigerator User Manual


 
17
Active Smart™ cleaning care – special features
Humidity Control System (where fitted)
Important!
When cleaning the shelf above the vegetable bins,
we recommend that you do not disassemble the
Humidity Control System from the shelf.
In the event that the plastic lid and humidity slides
become separated from the glass shelf, follow these
instructions to reassemble.
1
Turn shelf upside down
2
To attach humidity slides onto
shelf front corners, fit bottom clips
into shelf front trim. Next, slide
sideways towards shelf until arm
clips onto glass.
3
To attach humidity control lid – with
text facing you, align lid with front
of shelf. Hold lid vertically and fit
front end into retainer on shelf.
Ensure lid fits into retainer as well as
underneath humidity slides.
4
At the sides of the shelf, adjust
humidity slide tabs so that the plastic
lid is between the shelf and the tabs.
5
If clips on back of shelf are present,
fasten lid with rear clips. Ensure that
the cover is fully secure at front and
back of shelf.
Humidity Slides
Retainer
Fig.12 Humidity Control System cleaning