Filter
Top Products
12
Active Smart™ Special Features
Divider Instructions (680 and 790 Wide Models Where Fitted)
To fit the divider, insert divider into bin on an angle, straighten and slot into place. To adjust the
divider, fully extend the bin, partially lift the divider, slide sideways and re-slot into position.
Bottle Rack
The bottle rack can be used to store a variety of bottles and can be positioned anywhere you
would a shelf. To re-position, lift the rear of the rack and pull forward. Bottles are best stored with
the top facing the front of the refrigerator.
Solid Freezer Bins (635 Wide Models)
Remove by pulling the bin out until it stops. Remove
the white clips from both sides by pulling upward, then
continue to slide the bin out. Clean in warm, soapy water.
To reassemble, slide the bins back into the runners and
replace the white clips.
Slide the bin back to its original position.
Upper Freezer Shelf (635 Wide Models)
To remove for cleaning firstly pull out top bin to allow easy access to shelf. Using the front of the
shelf lift the back edge of the shelf and pull forward. Clean in warm soapy water and slide back
into position until it clicks into place.
Remove the white clip to slide bin out.
Clip in place for normal usage.