Filter
Top Products
11
Cleaning and maintenance
Replacing the light bulb
1
To avoid electric shock, unplug your Wine Chiller before replacing the bulb.
2
Remove the light cover as illustrated (Fig. 7).
3
Unscrew the bulb and replace.
Bulb specification: 220-240V,15W,E14
4
Refit light cover.
Normal operating sounds you may hear
Running/boiling water, gurgling sounds or slight vibrations are the result of the refrigerant
circulating through the cooling coils.
The thermostat control will click when it cycles on and off.
Other sounds may be heard for the following reasons:
– Cabinet not level.
– Floor uneven or weak.
Transporting your Wine Chiller
Always move the Wine Chiller vertically. Do not transport the product lying down as possible
damage to the sealed system could occur.
Note:
After moving, wait for 30 minutes before plugging in the Wine Chiller.
Light Cover
1
2
Fig 7. Removing the light cover
FP UG Template.indd 11 8/9/08 3:58:05 PM